Re: lynx

["ddbrown" <ddbrown@xxxxxxxxxxxxxxxx>]

Hello
Thank you for your help,it worked. Maybe I should read the man pages more
often
Darren
----- Original Message -----
From: Dirk H Bartley <bartleyd2@net-link.net>
To: <members@kalamazoolinux.org>
Sent: Tuesday, January 23, 2001 1:02 AM
Subject: Re: lynx


> ddbrown wrote:
> >
> > Hello
> >
> > I have a ppp connection via a modem
> > I can ping internal hosts but external
> >
> > The output for the commands
> >
> > /bin/netstat -nr
> > /sbin/ifconfig
> >  cat /etc/resolv.conf
> >
> > are as follows:
> > Destination     Gateway         Genmask         Flags   MSS Window  irtt
> > Iface
> > 212.1.128.28    0.0.0.0         255.255.255.255 UH        0 0          0
> > ppp0
> > 192.168.1.201   0.0.0.0         255.255.255.255 UH        0 0          0
> > eth0
> > 192.168.1.200   0.0.0.0         255.255.255.255 UH        0 0          0
> > eth0
> > 192.168.1.0     0.0.0.0         255.255.255.0   U         0 0          0
> > eth0
> > 0.0.0.0         192.168.1.100   0.0.0.0         UG        0 0          0
> > eth0
> >
> > eth0      Link encap:Ethernet  HWaddr 00:80:C8:FD:12:15
> >           inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           RX packets:406 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:1480 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:100
> >           Interrupt:11 Base address:0x6200
> >
> > eth0:0    Link encap:Ethernet  HWaddr 00:80:C8:FD:12:15
> >           inet addr:192.168.1.200  Bcast:192.168.1.255
Mask:255.255.255.0
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           Interrupt:11 Base address:0x6200
> >
> > eth0:1    Link encap:Ethernet  HWaddr 00:80:C8:FD:12:15
> >           inet addr:192.168.1.201  Bcast:192.168.1.255
Mask:255.255.255.0
> >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >           Interrupt:11 Base address:0x6200
> >
> > lo        Link encap:Local Loopback
> >           inet addr:127.0.0.1  Mask:255.0.0.0
> >           UP LOOPBACK RUNNING  MTU:3924  Metric:1
> >           RX packets:877 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:877 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:0
> >
> > ppp0      Link encap:Point-to-Point Protocol
> >           inet addr:212.1.137.105  P-t-P:212.1.128.28
Mask:255.255.255.255
> >           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
> >           RX packets:19 errors:0 dropped:0 overruns:0 frame:0
> >           TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
> >           collisions:0 txqueuelen:10
> >
> > nameserver 212.1.130.10
> > nameserver 212.1.128.156
> >
> > Thanks
> > Darren
> can you ping 212.1.128.28
>
> also I notice that your gateway is ipaddress 192.168.1.100.  To
communicate with
> the outside world the gateway should be the ppp0 device.
>
> man route tells me commands similar to
>
> route del default gw
> route add default gw 212.1.128.28
>
> might do the trick without disconnecting.
>
> /etc/ppp/options should include defaultroute as an option.
>
> Dirk
>